|
الرقم
|
عنوان الدراسة
|
اسم الباحث
|
سنة الدراسة
|
|
1
|
Dynamic modeling of TENORM exposure risk during drilling and production.
|
ALNabhani, Khalid; et al.
|
2018
|
|
2
|
Predicting the oil production using the novel multivariate nonlinear model based on Arps decline model and kernel method.
|
Ma, Xin et al.
|
2018
|
|
3
|
Application of Fuzzy c-means algorithm for the estimation of Asphaltene precipitation.
|
Taherpour, Alireza et al.
|
2018
|
|
4
|
A PSO-ANFIS framework for prediction of density of bitumen diluted with solvents.
|
Banashooshtari, Hooman et al.
|
2018
|
|
5
|
Casing Wear Prediction with Considering Initial Internal Casing Eccentricity.
|
Tan, Leichuan et al.
|
2018
|
|
6
|
Dramatic Enrollment Shifts: Plague Petroleum Engineering Programs.
|
Zborowski, Matt
|
2018
|
|
7
|
Influx management strategy enables automated MPD response.
|
GRAYSON, BRIAN et al.
|
2018
|
|
8
|
Optimizing drilling dynamics with acquisition and analysis of high-resolution downhole data.
|
CORRIE, GRANT et al.
|
2018
|
|
9
|
Subsurface DNA diagnostics aid well spacing decisions in the Permian.
|
PERCAK-DENNETT et al.
|
2018
|
|
10
|
Kick control reliability analysis of managed pressure drilling operation.
|
Sule, Idris et al.
|
2018
|
|
11
|
EFFECT OF POLYMER FLOODING ON THE PETROPHYSICAL CHARACTERS OF SANDSTONE RESERVOIR: A CASE STUDY OF GUDAO OILFIELD IN CHINA.
|
Yuming Liu et al.
|
2018
|
|
12
|
A dynamic and quantitative risk assessment method with uncertainties for offshore managed pressure drilling phases.
|
Zhang, Laibin et al.
|
2018
|
|
13
|
Rapid phase stability calculations in fluid flow simulation using simple discriminating functions.
|
Gaganis, Vassilis
|
2018
|
|
14
|
Geo-engineered completions improve recovery in unconventional.
|
FULKS, ROBERT et al.
|
2018
|
|
15
|
Effects of compositional variations on CO2 foam under miscible conditions.
|
Kahrobaei, Siavash et al.
|
2018
|
|
16
|
Asymmetric membranes for destabilization of oil droplets in produced water from alkaline-surfactant-polymer (ASP) flooding.
|
Ramlee, Azierah et al.
|
2018
|
|
17
|
Polymer flooding and its combinations with other chemical injection methods in enhanced oil recovery.
|
Pogaku, Ravindra et al.
|
2018
|
|
18
|
Application of α-amylase as a novel biodemulsifier for destabilizing amphiphilic polymer-flooding produced liquid treatment.
|
Jiang, Jiatong et al.
|
2018
|
|
19
|
Design of a safety cost estimation parametric model in oil and gas engineering, procurement and construction contracts.
|
Toutounchian, Sanaz et al.
|
2018
|
|
20
|
Design of a safety cost estimation parametric model in oil and gas engineering, procurement and construction contracts.
|
Toutounchian, Sanaz et al.
|
2018
|
|
21
|
Polymer Stability After Successive Mechanical-Degradation Events.
|
Jouenne, S. et al.
|
2018
|
|
22
|
Experimental Investigation of the Effect of Polymers on Residual Oil Saturation.
|
Heesong Koh et al.
|
2018
|
|
23
|
A Case Study on Simulation of In-Situ CO2 Huff-'n'-Puff Process.
|
Yong Wang et al.
|
2018
|
|
24
|
Synthesis and Assessment of a CO2‐Switchable Foaming Agent Used in Drilling Fluids for Underbalanced Drilling.
|
Su, Junlin et al.
|
2018
|
|
25
|
A comprehensive analysis of fracture initiation and propagation in sandstones based on micro-level observation and digital imaging correlation.
|
He, Wenhao et al.
|
2018
|
|
26
|
Influence of Thermal Marangoni convection on the recovery of bypassed oil during immiscible injection.
|
Abolhosseini, Pejman et al.
|
2018
|
|
27
|
Prediction of formation damage at water injection wells due to channelization in unconsolidated formations.
|
Bautista, J.F. et al.
|
2018
|
|
28
|
Low salinity polymer flooding: Lower polymer retention and improved injectivity.
|
Unsal, E. et al.
|
2018
|
|
29
|
Influence of polymer properties on selection of production strategy for a heavy oil field
|
Lamas, Luís Fernando et al.
|
2018
|
|
30
|
Performance forecasting for polymer flooding in heavy oil reservoirs.
|
Amirian, Ehsan et al.
|
2018
|
|
31
|
A microfluidic pore model to study the migration of fine particles in single-phase and multi-phase flows in porous media.
|
Jung, Jongwon et al.
|
2018
|
|
32
|
A polymer flooding mechanism for mature oil fields: Laboratory measurements and field results interpretation.
|
Silva, Ivonete et al.
|
2018
|
|
33
|
Flow patterns and mass transfer performance of miscible liquid-liquid flows in various microchannels: Numerical and experimental studies.
|
Gómez-Pastora et al.
|
2018
|
|
34
|
Fuzzification of the miscible displacement model in heterogeneous porous media.
|
Almeida, C.G. et al.
|
2018
|
|
35
|
Stochastic modelling of particulate suspension transport for formation damage prediction in fractured tight reservoir.
|
Xu, Chengyuan et al.
|
2018
|
|
36
|
Reservoir characterization in under-balanced drilling using low-order lumped model.
|
Nikoofard, Amirhossein et al.
|
2018
|
|
37
|
Wave processes in relation to the tectono-sedimentary of the Tarim basin: A new method for basin study.
|
Gao, Xiaoqiao et al.
|
2018
|
|
38
|
Study on multipath channels model of microwave propagation in a drill pipe.
|
Xia, Wenhe et al.
|
2018
|
|
39
|
Analysis of miscible displacement through porous media with vanishing molecular diffusion and singular wells.
|
Droniou, Jérôme et al.
|
2018
|
|
40
|
CFD-DEM modeling of cuttings transport in underbalanced drilling considering aerated mud effects and downhole conditions.
|
Akhshik, Siamak et al.
|
2018
|
|
41
|
The influence of solute concentration and temperature of drilling fluids on wellbore failure in tight formation.
|
Tang, Zhiqiang et al.
|
2018
|
|
42
|
From shallow horizontal drilling to ERD wells: How scale affects drillability and the management of drilling incidents.
|
Cayeux, Eric et al.
|
2018
|
|
43
|
Chemical cleaning of ultrafiltration membranes for polymer-flooding wastewater treatment: Efficiency and molecular mechanisms.
|
Liu, Guicai et al.
|
2018
|
|
44
|
Two-stage genetic algorithm for parallel machines scheduling problem: Cyclic steam stimulation of high viscosity oil reservoirs.
|
Sheremetov, Leonid et al.
|
2018
|
|
45
|
A hydrate shell growth model in bubble flow of water-dominated system considering intrinsic kinetics, mass and heat transfer mechanisms.
|
Sun, Xiaohui et al.
|
2018
|
|
46
|
Use of Managed-Pressure Drilling Requires Adjustments To Bridge Gap to Well Control.
|
Pinheiro da Silva et al.
|
2018
|
|
47
|
Assessment of safety barriers for the prevention of cascading events in oil and gas offshore installations operating in harsh environment.
|
Bucelli, Marta et al.
|
2018
|
|
48
|
Application of ultrasonic as a novel technology for removal of inorganic scales (KCl) in hydrocarbon reservoirs: An experimental approach.
|
Taheri-Shakib et al.
|
2018
|
|
49
|
Reservoir recovery: An opportunity for digital transformation.
|
ZORNIO, PETER
|
2018
|
|
50
|
Radiological survey of the covered and uncovered drilling mud depository.
|
Jónás, Jácint et al.
|
2018
|
|
51
|
A fractal model for gas-water relative permeability in inorganic shale with nanoscale pores.
|
Zhang, Tao et al.
|
2018
|
|
52
|
A numerical study on the impact of thermal alterations in porous media during hot fluid injection process employing a modified Boussinesq model.
|
Obembe, Abiola et al.
|
2018
|
|
53
|
An easy-to-implement numerical method for quantifying time-dependent mudcake effects on near-wellbore stresses.
|
Feng, Yongcun et al.
|
2018
|
|
54
|
Viscosity effects on sand flow regimes and transport velocity in horizontal pipelines.
|
Zorgani, E. et al.
|
2018
|
|
55
|
Modelling and straight-ray tomographic imaging studies of cross-hole radio-frequency electromagnetic data for mineral exploration.
|
Yongxing Li et al.
|
2018
|
|
56
|
Extended finite element modeling of production from a reservoir embedded with an arbitrary fracture network.
|
Xia, Yang et al.
|
2018
|
|
57
|
AHP-Ideal Point Model for Large Underground Petroleum Storage Site Selection: An Engineering Application.
|
Zhiqiang Li et al.
|
2018
|
|
58
|
Dynamic modeling of TENORM exposure risk during drilling and production.
|
ALNabhani, Khalid et al.
|
2018
|
|
59
|
TECHNOLOGICAL ASPECTS OF OXIDATION PROCESSES OF SPECIAL INTEREST TO THE PETROLEUM ENGINEERING.
|
XU, D. R. et al.
|
2018
|
|
60
|
Efficiency of enhanced oil recovery using polymer-augmented low salinity flooding.
|
Almansour, Abdullah et al.
|
2018
|
|
61
|
A simulation investigation of performance of polymer injection in hydraulically fractured heterogeneous reservoirs.
|
Abbasi, J. et al.
|
2018
|
|
62
|
Engineering Students' Views of Corporate Social Responsibility: A Case Study from Petroleum Engineering.
|
Smith, Jessica et al.
|
2018
|
|
63
|
Stress Inversion of Coal with a Gas Drilling Borehole and the Law of Crack Propagation.
|
Tianjun Zhang et al.
|
2018
|
|
64
|
Predicting the oil production using the novel multivariate nonlinear model based on Arps decline model and kernel method.
|
Ma, Xin et al.
|
2018
|
|
65
|
Development of a General Package for Resolution of Uncertainty-Related Issues in Reservoir Engineering.
|
Liang Xue et al.
|
2018
|
|
66
|
Application of Fuzzy c-means algorithm for the estimation of Asphaltene precipitation.
|
Taherpour, Alireza et al.
|
2018
|
|
67
|
An improved deconvolution algorithm using B-splines for well-test data analysis in petroleum engineering.
|
Liu, Wenchao et al.
|
2018
|
|
68
|
Prediction of Polymer Flooding Performance with an Artificial Neural Network: A Two-Polymer-Slug Case.
|
Ebaga-Ololo, Jestril et al.
|
2018
|
|
69
|
Casing Wear Prediction with Considering Initial Internal Casing Eccentricity.
|
Tan, Leichuan et al.
|
2018
|
|
70
|
The Performance of Polymer Flooding in Heterogeneous Type II Reservoirs--An Experimental and Field Investigation.
|
Huiying Zhong et al.
|
2018
|
|
71
|
EFFECT OF PORE-THROAT CHARACTERISTICS AND HETEROGENEITY ON POLYMER FLOODING IN HIGH TEMPERATURE AND HIGH SALINITY RESERVOIRS: A CASE STUDY OF DANGGANG OILFIELD IN CHINA.
|
XIXIN WANG et al.
|
2018
|
|
72
|
Main Controlling Factor of Polymer-Surfactant Flooding to Improve Recovery in Heterogeneous Reservoir.
|
Yin, Dandan et al.
|
2018
|
|
73
|
Dramatic Enrollment Shifts: Plague Petroleum Engineering Programs.
|
Zborowski, Matt
|
2018
|
|
74
|
Optimizing drilling dynamics with acquisition and analysis of high-resolution downhole data.
|
CORRIE, GRANT et al.
|
2018
|
|
75
|
Asphaltene deposition during flow through pipes: Parametric and inhibition analyses.
|
Hu, Yisheng et al.
|
2018
|
|
76
|
A Workflow for Static Reservoir Modeling Guided by Seismic Data in a Fluvial System.
|
Koneshloo, Mohammad et al.
|
2018
|
|
77
|
Influence of Bound and Mobile Water on Gas Well Production in a Low-Permeability Sandstone Gas Reservoir.
|
Qi, Li et al.
|
2018
|
|
78
|
Determination of the Specific Water Throughput Capacity of a Fixed Wire Mesh.
|
Kichkar', I. et al.
|
2018
|
|
79
|
Treatment on oil/water gel deposition behavior in non-heating gathering and transporting process with polymer flooding wells.
|
Wang, Zhihua et al.
|
2018
|
|
80
|
Silica Nanoparticle Assisted Polymer Flooding of Heavy Crude Oil: Emulsification, Rheology, and Wettability Alteration Characteristics.
|
Saha, Rahul et al.
|
2018
|